Реставрация Гаражной Находки - Думал, ЭТО МУСОР, Пока не Открыл!

Restoration of Rusted Bundle - Thought It Was Trash Until! Hi, today I’m presenting an interesting and unique restoration of a garage find. As usual, this item was about to be thrown away, but someone remembered me and gave it to me, saying it was just some dirty, wrapped-up device. For me, this is always interesting. The item had been sitting in a garage for quite a long time, and of course I agreed and accepted this gift. First of all, I disassembled it into parts, предварительно removing the dirty fabric and paper. It seems this paper is from the mid-20th century, because I date the item itself to the early 20th century. After removing all the dirt, I started cleaning it with a soft brush. Then I removed the base and, again using natural methods, placed all the brass parts into a mixture of flour, salt, cleaning agents, and kefir. I also removed the handle, but at first I made a mistake, thinking it wasn’t threaded, but this didn’t cause any problems later. I placed the iron part in kerosene, and only after two days did I begin cleaning it. The brass detail and all components I cleaned using a soft wire brush with cleaning powder, while the iron part I cleaned with a harder brush. After cleaning, I moved on to restoring the broken part inside the burner itself. It was not possible to remove it, so I had to saw it out and then extract it. After that, I used a piece of brass tube, cut threads into it, and replaced the missing original part. Then I restored the broken handle of another component: also made from brass, I cut it out using a jigsaw, then finished it with a file and soldered it using silver. Finally, after assembling everything, I used clean modern natural cotton wool and cotton pads as filler for the burner, splitting them into two parts. I filled it with 95% pure alcohol and, of course, did a test. The burner works perfectly. However, to heat a kettle, it takes more time than gas. Don’t forget to share this video, leave your comments, press the like button, and subscribe. And if you want to purchase my works, contact me on social media. Links are in the video description and on the channel’s main page. Thank you. Sincerely, Alex. Thanks for attention! Good luck and health to everyone! With best wishes, Alex! Please subscribe to my channel: @ScrewsAndTools 🍖 My New Cooking channel! @screwsandtoolscooking Patreon: https://www.patreon.com/Screwsandtools Paypal: paypal.me/screwsandtools ko-fi.com/screwsandtools #screwsandtools #rusted #restoration